Bracelet Shambhala with their hands : a master class by double weaving with photos and video

Bracelet Shambhala with their hands on an example of double weave

All girls love a variety of ornaments and jewelry, and when it is done with his own hands, it is not only beautiful, but also exclusive.

There are many types of bracelets.Today we look at how to make a bracelet Shambhala own hands.

The basis of these techniques macrame bracelets lie.These bracelets look beautiful and carry the energy that it puts needlewoman.

where to begin weaving

First of all, you need to buy tools and accessories for the bracelet.Base band - this beads.They need about 20 pieces, but it all depends on the size of the beads and the desired length.To combine these beads, you will need a special thin cord or string.The main thing that the thread size of the hole matches the diameter of the beads.It is also essential tools for the manufacture of the bracelet are scissors, scotch tape and superglue.

Every Needlewoman should be interested in this bracelet, weave because it is fairly easy.It can be made to your l

iking, and it will be your real mascot.Before you get started, you need to choose the color of the cord and the type of beads.Nowadays there are many types of material required, thanks to your bracelet can turn unique.

Before starting production of the bracelet, please be patient, because the first time can not get exactly what you see in the picture or in the store, but when you nabete hand, working with such an ornament will seem very simple.

Workshop: Shamballa bracelet with their own hands - a double weave with step by step photos

If you are already familiar with the technique of performing these bracelets, you will need no more than 30 minutes on a weaving.

1. Take two strands of a length of 25 cm, at the ends make nodes and each thread wear one bead, these threads are called internal.Now take a working thread a length of 120 cm and tie it inside at a distance of 2-3 cm.

2. Each internal thread should be put on approximately 12 beads, the first bead left the thread and final rules should be slightly smaller than the restit is necessary to ensure that their location was uniform.

to the internal thread could pull in a subsequent process, they need to be firmly fixed at the edge of the table, for example, a large clip.

3. Good stretch yarn and beads to slide tightly weaving.Further, one of the worker threads wrap basis spiral clockwise, the second end do the same, but in reverse.

4. When the main part of the band is ready, you need to again tie the ends of the internal working of threads, as well as in the beginning, 2-3 cm, put on their beads and tie knots.

Making clasp

to weave fasteners require special attention.

is necessary to lay down the bracelet ends parallel to each other and put them under the thread.Further, this thread needs to be done around the end nodes, they should be about 5.8, depending on your band size.When the units are made, the rest of the thread should be cut, and the ends of superglue to fix the thread are not isolated, and the bracelet is not broke.Remember that you need to glue to drip into a knot and then tighten, so buckle secured.

detailed video tutorials:

All girls love a variety of ornaments and jewelry, and when it is done with his own hands, itnot only beautiful, but also exclusive.

There are many types of bracelets.Today we look at how to make a bracelet Shambhala own hands.

The basis of these techniques macrame bracelets lie.These bracelets look beautiful and carry the energy that it puts needlewoman.

where to begin weaving

First of all, you need to buy tools and accessories for the bracelet.Base band - this beads.They need about 20 pieces, but it all depends on the size of the beads and the desired length.To combine these beads, you will need a special thin cord or string.The main thing that the thread size of the hole matches the diameter of the beads.It is also essential tools for the manufacture of the bracelet are scissors, scotch tape and superglue.

Every Needlewoman should be interested in this bracelet, weave because it is fairly easy.It can be made to your liking, and it will be your real mascot.Before you get started, you need to choose the color of the cord and the type of beads.Nowadays there are many types of material required, thanks to your bracelet can turn unique.

Before starting production of the bracelet, please be patient, because the first time can not get exactly what you see in the picture or in the store, but when you nabete hand, working with such an ornament will seem very simple.

Workshop: Shamballa bracelet with their own hands - a double weave with step by step photos

If you are already familiar with the technique of performing these bracelets, you will need no more than 30 minutes on a weaving.

1. Take two strands of a length of 25 cm, at the ends make nodes and each thread wear one bead, these threads are called internal.Now take a working thread a length of 120 cm and tie it inside at a distance of 2-3 cm.

2. Each internal thread should be put on approximately 12 beads, the first bead left the thread and final rules should be slightly smaller than the restit is necessary to ensure that their location was uniform.

to the internal thread could pull in a subsequent process, they need to be firmly fixed at the edge of the table, for example, a large clip.

3. Good stretch yarn and beads to slide tightly weaving.Further, one of the worker threads wrap basis spiral clockwise, the second end do the same, but in reverse.

4. When the main part of the band is ready, you need to again tie the ends of the internal working of threads, as well as in the beginning, 2-3 cm, put on their beads and tie knots.

Making clasp

to weave fasteners require special attention.

is necessary to lay down the bracelet ends parallel to each other and put them under the thread.Further, this thread needs to be done around the end nodes, they should be about 5.8, depending on your band size.When the units are made, the rest of the thread should be cut, and the ends of superglue to fix the thread are not isolated, and the bracelet is not broke.Remember that you need to glue to drip into a knot and then tighten, so buckle secured.

detailed video tutorials:

Search

Related Posts

Categories